Strahl D1600mkII - Manual (Page 134)

126
The insert effects can be applied to the analog inputs during
recording, or to track playback.
The D1600mkII lets you use up to eight different insert
effects simultaneously.
Insert effects cannot be used if “DigiIn” is turned “On”
in the [INPUT/TUNER] “Ch1–8” or “Ch9–16” tab pages
(→p.123).
P1 InsAsn: Insert effect insertion
location/type
1. Assign .................................. [In(Input), Trk(PlayTrack)]
Select whether the insert effect will be applied to an ana-
log input or to a playback track.
In (Input)
: Use these settings to apply an effect to analog
inputs from the [INPUT 1]–[INPUT 8/GUITAR IN] jacks
while recording.
Trk (PlayTrack)
: Use these settings to apply an effect to a
playback track. Effects can also be used during mix-
down.
2. SelectEffType ..........[1in2outx2, 2in2outx2, 1in1outx4,
1in1outx8]
Selects the structure of the insert effects.
The number of effects you can select will depend on this
setting. For the effects available in each structure, refer to
“Effect Program List” (→p.166).
1in2outx2 : Choose this if you want to use two mono-in/
stereo-out effects.
This is the best choice when you want to add spaciousness
to a lead guitar or vocal. You can also use these as 1 in 1
out monaural effects.
You cannot select this if “Assign” is “Trk.”
2in2outx2 : Choose this if you want to use two stereo-in/
stereo-out effects.
This is the best choice for stereo input sources such as a
keyboard.
1in1outx4
: Choose this if you want to use four mono-in/
mono-out effects.
This is the best choice for sources with a fixed location,
such as rhythm guitar.
1in1outx8
: Choose this if you want to use eight mono-
in/mono-out effects.
This is the best choice for fixed-location sources such as
drums.
3. InsertTo......................................................................
Select the location at which the insert effect will be
inserted.
Press the “ ” button to access the dialog box and make
settings. Press the “OK” button to execute your settings,
or press the “Cancel” button to cancel them.
The screen that appears next will differ according to
what you choose for “Assign.”
When you specify the insertion location of insert
effect, the setting of the lower-numbered effect will
take priority. For example if you make the same
settings for effect number 1 as for effect number 4,
the settings of 4 will be cancelled. Also, it will not be
possible to make settings identical to the settings of
1 for any other effect numbers.
When “Assign” is “In”
Specify the return channel.
3a. Input.............................(In1...8, *CL, CR, DrL, DrR)
This shows the selected input.
In1...8
: Analog input ([INPUT1]–[INPUT8/GUITAR
IN])
*CL, CR: L or R audio signals from the internal CD-RW
drive (sold separately)
DrL, DrR
: Rhythm L or rhythm R.
* Only if an internal CD-R/RW drive is installed
3b. Effect ......................................................... (1…8)
This shows the effect number.
3c. SelectCh ............................................ [1…16, Off]
Specify the return channel for the effect output.
When “Assign” is “Trk”
The signal flow will be: input channel select → (effect) →
(return = insert channel).
3a. SelectCh............................................ [1…16, Off]
Select the insert destination mixer channel.
When “SelectEffType” is “2in2out x 2 ,” only odd-
numbered channels can be selected for “SelectCh.”
3b. Effect ......................................................... (1…8)
This shows the insert effect number.
3c. OutputCh .......................................... (1…16, Off)
This shows the return channel of the effect output. The
same channel as “3a. SelectCh” will be selected.
4. Pair ...........................................................................
You can specify that adjacent mixer channels be paired.
For details, refer to “P1 Ch1–8: Select the inputs for
mixer channels 1–8” “Pair” (→p.123).
19. INSERT EFFECT
1
2 3
4 3a
3c 3b