Playback, Program play, Other playback options – Strahl D1600mkII User Manual
Page 53
45
This section explains basic playback on the D1600mkII,
and also how to use program playback.
1. Playback
1. Select the track(s) for playback.
Press the [TRACK STATUS] keys for the tracks that
you wish to play, to put them in PLAY (LED lit
green).
2. Move to the time location from which you wish to
playback.
For details on changing the time location, refer to
p.46.
3. Begin playback.
Press the [PLAY] key. (The [PLAY] LED will light.)
4. Stop playback.
Press the [STOP] key. (The [PLAY] LED will turn off.)
You can also use a PS-1 foot switch (separately sold
option) to start and stop playback. (→p.91)
2. Program play
Here’s how you can play back multiple songs in the or-
der you specify.
In addition to using this to play songs in a desired order,
this function is also convenient when mixing down to
DAT or MD.
Setting up a program
1. Access the [SONG/CD] “PrgPlay” tab page.
2. Select the first song.
Use the scroll buttons to select “01” in the program
play list, and rotate the [VALUE] dial to select a song.
If you wish to change the drive, press the “Drive”
button. Select the desired drive in the “Drive Select”
screen.
3. Select the second, third, and subsequent songs in
the same way.
To delete a song from the list, select the song and
rotate the [VALUE] dial to select “– – –.”
The program play list is maintained until you turn off
the power.
The program play list can be played only when the
“PrgPlay” tab page is displayed.
Playing the program Playlist
1. Access the [SONG/CD] “PrgPlay” tab page.
2. Press the [PLAY] key to begin playback.
Songs will be played in the order of the list, starting
with the first song of the program. During playback
you can press the [FF] key to skip to the next song, or
the [REW] key to skip to the beginning of the current
song or (if you are already at the beginning of the cur-
rent song) to the beginning of the previous song.
3. Press the [STOP] key to stop playback.
3. Other playback options
Loop playback
This function repeatedly plays the IN–OUT region of the
song. This is convenient when you wish to audition that
region, and is also used in conjunction with auto punch
recording to perform loop recording.
1. Select the playback track.
Press the [TRACK STATUS] key of the playback
track(s) to select PLAY (LED lit green).
2. Register the desired region (IN–OUT) for loop play-
back. (→p.46)
You can also set this by using “Wave” in [LOOP]
“Loop” or [AUTO PUNCH] “AtPunch” tab page.
3. Access the [LOOP] “Loop” tab page, and turn the
“Loop” button “On.”
4. Begin loop playback.
When you press the [PLAY] key, playback will begin
from the IN location, and repeat over the IN–OUT
region.
5. Press the [STOP] key to stop.
In addition to the playback methods described above, the
following playback methods are also available on the
D1600mkII. For details refer to the page given.
• Apply EQ to the playback audio. (→p.48)
• Adjust the level and pan of the playback audio.
• Apply effects to the playback audio. (→p.55)
• Play the built-in rhythms together with the playback.
Playback