Lucent Technologies MN10285K - Manual (Page 28)

General Description
General Specifications
MN102H75K/F75K/85K/F85K LSI User Manual Panasonic Semiconductor Development Company
27
Panasonic
Timer/counters Four 8-bit timers:
♦ Cascading function (forming 16- or 32-bit timers)
♦ Timer output
♦ Selectable clock source (internal or external)
♦ Serial interface clock generation
♦ Start timing generation for analog-to-digital converter
Two 16-bit timers:
♦ Compare/capture registers
♦ Selectable clock source (internal or external)
♦ PWM and one-shot pulse output
♦ Two-phase encoder input (4x or 1x formats)
16-bit watchdog timer
ROM correction 16 bytes (8-bit × 16)
SYSCLK output SYSCLK or SYSCLK/2 14 (732.42 Hz)
Serial interfaces ♦ Two UART/synchronous serial/I 2 C (master only) interfaces
♦ One I
2
C interface (multimaster; 2-channel with 1 internal circuit)
Analog-to-digital
converter
♦ 8-bit with 12 channels
♦ Automatic scanning
IR remote signal
receiver
♦ Automatic HEAMA / 5-/6-bit detection
♦ 1-bit interrupt
PWM 8-bit with 7 channels (3.3-volt tolerance)
Closed-caption
decoder
♦ 2 channels
♦ Internal sync separator
On-screen display Three-layer format
♦ Text layer: 16 × 18 pixels (16 × 26 in closed caption mode), blink-
ing, outlining, shadowing (foreground and background), shutter
effect, italics (CC mode), underlining (CC mode)
♦ Graphics layer: 16 Ч 16 / 16 Ч 18 pixels
♦ Cursor layer: 16 Ч 16 / 32 Ч 32 pixels (1 cursor, displaying one
graphic tile)
Color depth: One 16-color palette out of 4096 colors
Dot clock
♦ Internal PLL frequencies: 12, 16, 24, 32 and 48 MHz
♦ External clock: 16–48 MHz
♦ LC blocking oscillator: 16–48 MHz
I/O ports 66(MN102H75K/F75K) / 50(MN102H85K/F85K)
Package 84-pin-QFP(MN102H75K/F75K) / 64-pin-SDIL(MN102H85K/F85K)
Table 1-1 General Specifications
Parameter Specification