Lucent Technologies MN10285K - Manual (Page 321)

MN102HF75K Flash EEPROM Version
Using the Onboard Serial Programming Mode
Panasonic Semiconductor Development Company MN102H75K/F75K/85K/F85K LSI User Manual
320
Panasonic
B.4.1 Configuring the System for Onboard Serial Programming
The workstation containing the program data sends the program to the serial
writer through an IC card. Through serial communication, the serial writer
programs the flash memory inside the microcontroller on the target board. You
must supply an external V
DD
source to the target board. The serial writer supplies
the V
PP
source.
You must provide the personal computer that holds the IC card. To order the
serial writer, contact:
(Provisional)
Yokogawa Digital Computer Co., Ltd.
Microcontroller System Joint Headquarters, Equipment Business Center
Keio Fuchu 1-chome Building, 7F
1-9 Fuchu-cho, Fuchu-shi
Tokyo, Japan
Model: AF200 flash microcontroller programmer
Figure B-5 Serial Writer Hardware Setup
IC
card
Target board
Serial writer
(AF200 flash microcontroller
programmer (provisional))
AC adaptor
Target board
power source
V
DD
IC
card