Lincoln Electric PIPELINER 200 User Manual
Pipeliner 200, Svm193-a, Service manual
Advertising
Table of contents
Document Outline
- Master Table of Content
- Safety
- Section A - Installation
- Section AA - Installation
- Section AAA - Installation
- Section B - Operation
- Section BB - Operation
- Section BBB - Operation
- Section C - Accessories
- Section CC - Accessories
- Section CCC - Accessories
- Section D - Maintenance
- Section DD - Maintenance
- Section DDD - Maintenance
- Section E - Theory of Operation
- Section F - Troublehooting & Repair
- Symptoms
- The engine starts and runs at correct speed, but there is no, or very low, welder output voltage. There is no DC auxiliary output voltage.
- The engine starts and runs at the correct speed but there is no, or very low, welder output. The DC auxiliary output voltage is normal.
- The welding output varies abnormally. The auxiliary output remains constant. The engine is operating correctly.
- The engine starts and runs at the correct speed, but there is no DC auxiliary output voltage at the 115V DC receptacle. The welding generator is functioning correctly.
- The actual welding current is much less than is indicated on the dials.
- The actual welding current is much greater than is indicated on the dials.
- The engine will no treturn to low idle when the welding and auxiliary loads are removed.
- The engine will NOT go to high speed when a load is applied to the welding output terminals. The engine does go to high speed when a load is applied to the D
- The engine will NOT go to high speed when a load is applied to the DC auxiliary receptacle. The engine does go to high speed when a load is applied to the welding output terminals. When the engine is operating in the high RPM condition, both welding output and DC auxiliary are normal.
- The engine “cranks” but will not start.
- The engine “cranks” AND starts, but runs only about 30-60 seconds and shuts down.
- The welding arc is loud and spatters excessively.
- The welding arc frequently “popsout”.
- Section G - Electrical Diagrams