Panasonic DVCPRO50 AJ-D960EG - Manual (Page 114)

114 (E)
SDTI interface board
How to use the SDTI/SDI common output signals
1. Using the signals as the SDI output signals
1-1 When playing back a DVCPRO50 or DVCPRO format tape in the EE mode
Select “SDI” as the setup menu No. 652 (SER OUT1 SEL) setting.
1-2 When playing back a DV or DVCAM format tape
Select “SDI” or “AUTO” as the setup menu No. 652 (SER OUT1 SEL) setting.
2. Using the signals as the SDTI output signals
2-1 When playing back a DVCPRO50 or DVCPRO format tape in the EE mode
Select “SDTI” or “AUTO” as the setup menu No. 652 (SER OUT1 SEL) setting.
2-2 When playing back a DV or DVCAM format tape
Select “SDTI” as the setup menu No. 652 (SER OUT1 SEL) setting.
<Notes>
• When playing back a DV or DVCAM format tape, DV compressed signals*
1 serve as the
SDTI output.
• The video and audio signals in the SDTI output signals cannot be adjusted.
• During SLOW/STILL playback, the unprocessed video and audio signals are output as the
SDTI output. When these video and audio signals are to be monitored using another
device, they may differ from the video and audio signals played back by this unit.
* 1 : Compliant with IEC61834-2.
How to use the 2
×
speed transmission mode
2
×
speed transmission mode is obtained by setting setup menu item No. 653 (SDTI MODE)
to “2X_P.” Insert a DVCPRO50 or DVCPRO tape and press the PLAY button for 2
×
speed
playback with the VTR and 2
×
speed output of signals to the SDTI.
<Notes>
• Setup menu item No. 653 (SDTI MODE) is only effective when setup menu item No. 652
(SER OUT SEL) is set to “SDTI” or “AUTO”.
• When the PLAY button is pressed in 2
×
speed transmission mode, playback will always be
performed at 2
×
speed and 1
×
speed playback cannot performed.
• In 2
×
speed transmission mode, the REC INHIBIT lamp will light when a tape is inserted,
and recording operations are inhibited. Further, TAPE mode is always established and the
EE screen is not output.
• When a DV/DVCAM tape is inserted, playback will always be at 1
×
speed, regardless of the
setup menu item No. 653 (SDTI MODE) setting.