Panasonic DVCPRO50 AJ-D960EG - Manual (Page 28)

28 (E)
Playback
1
Insert the cassette tape, and place the unit in the stop mode.
2
Press the PLAY button.
Regular playback is now commenced.
3
Adjust the audio playback level.
Pull out the audio level controls and turn them clockwise or counterclockwise to adjust
the levels. Normally, they are kept in the pushed-in state (unity value).
4
To end playback, press the STOP button.
The VTR now goes into the stop mode.
<Note>
Check that the SERVO lamp is lit during playback. If it flashes or if it is off, the images played
back will be disturbed.