Panasonic DVCPRO50 AJ-D960EG - Manual (Page 118)

118 (E)
Specifications
GENERAL
Power supply: AC 220 – 240 V, 50 – 60 Hz
Power consumption: 280 W
Operating ambient temperature: 5
°
C to 40
°
C
Operating ambient humidity: 10% to 90% (no condensation)
Weight: 20 kg
Dimensions (W
×
H
×
D): 424 (max. 435.4)
Ч
175.2
Ч
415 mm
(Not including the support legs, connectors, and JOG dial)
Recording format: DVCPRO50/DVCPRO format selectable
Recording video signal: 625i/525i selectable
Recording audio signal: DVCPRO50; 48 kHz 16-bit 4 channels
DVCPRO;
48 kHz 16-bit 2 channels
Recording tracks: Digital video audio; helical track
The time code is recorded in the sub-code area.
Cue track; 1 track
Control track; 1 track
Tape speed: 67.708 mm/sec (625i)
67.640 mm/sec (525i)
Recording time: 92 minutes (using the AJ-5P92LP)
33 minutes (using the AJ-5P33MP)
Tape: Metal tape
FF/REW time: Less than 3 min (with AJ-5P92LP)
Less than 2 min (with AJ-5P33MP)
Digital slow: DVCPRO50/DVCPRO; –1
×
to +2
×
speed
DV/DVCAM; –1
×
to +1
×
speed
Editing accuracy:
±
0 frames (using the time code)
Tape timer accuracy:
±
1 frame (using the continuous CTL signal)
Servo lock time: Less than 0.5 sec (colour framing/standby ON)
VIDEO
Digital video
Sampling frequencies:
625i/525i; Y; 13.5 MHz, P B /P R ; 6.75 MHz (DVCPRO50)
Quantizing: 8 bits
Video compression method: DCT + adaptive sampling + variable-length encoding
Video compression rate: DVCPRO50; 1/3.3
DVCPRO;
1/5
Error correction: Reed-Solomon product code
Video recording/playback bit rate: DVCPRO50; 50 Mbps
DVCPRO;
25 Mbps
Digital IN/Analogue Component OUT
Video bandwidth:
625i; Y; 25 Hz to 5.5 MHZ (
±
0.5 dB), 5.75 MHZ (–2.0 dB)
P B /P R ; 25 Hz to 2.5 MHZ (
±
0.5 dB), 2.75 MHZ (–2.0 dB)
525i; Y; 30 Hz to 5.5 MHZ (
±
1.0 dB), 5.75 MHZ (–2.0 dB)
P B /P R ; 30 Hz to 2.5 MHZ (
±
1.0 dB), 2.75 MHZ (–2.0 dB)
S/N ratio: Better than 60 dB
K factor: Less than 1%
Y/P B , P R delay: Max. 10 ns
Video input connector
Analogue component input
(option): BNC
×
3 (Y, P B , P R )
Y; 1.0 Vp-p, 75
Ω
P B /P R ; 0.7 Vp-p, 75
Ω
(100% colour bar, 0% black level)
Analogue composite input (option): BNC
×
2, loop-through, 75
Ω
on/off
Reference input: Analogue composite, BNC
×
2, loop-through, 75
Ω
on/off
Serial digital component input: Complies with SMPTE 259M-C/EBU Tech.3267-E standard, BNC
×
2, active through
SDTI input (option): Complies with SMPTE 305M/321M standard, BNC
×
2, active through (also serves as SDI
input connector)