Panasonic DVCPRO50 AJ-D960EG - Manual (Page 95)

ENGLISH
95 (E)
Video output signals and servo reference signal
Servo reference signal
The REF VIDEO input signal or video input signal is selected as the servo reference signal.
As shown in the figure below, the signal is selected in accordance with the setup menu
settings, VTR mode and availability of the video input signal.
YES
YES
YES
NO
Is the unit in one of
the editing modes?
INPUT EXT
AUTO
Start
NO
NO
What is the setup
menu No. 304 (SERVO
REF) setting?
Is the REF VIDEO input
signal available?
Has the unit been set to
the recording mode?
Is the video input signal
available?
Internal synchronization
Synchronization with
the video input signal Synchronization with the
REF VIDEO input signal
NO
YES
<Notes>
Synchronization is determined as follows depending on the availability of the REF VIDEO
input signal when “BB” or “CB” has been selected as the setup menu No. 600 (INT SG)
setting.
• When the REF VIDEO input signal is available: Synchronization with the REF VIDEO input
signal
• When the REF VIDEO input signal is not available: Internal synchronization