Panasonic DVCPRO50 AJ-D960EG - Manual (Page 59)

ENGLISH
59 (E)
Setup (setting) menus
SYSTEM menu
<SYSTEM>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
00 WFM SEL 0000 CTL
0001 TC
0002 VIDEO
0003 SYNC
0004 RF
0005 ENV
10 ENCODER 0000 REMOTE
SEL 0001 LOCAL
11 SYS SC 0000 –127
. .
. .
. .
0127 0
. .
. .
. .
0255 128
12 SYS H 0000 –108
. .
. .
. .
0108 0
. .
. .
. .
0216 108
13 VIDEO 0000 –32
. .
. .
PHASE . .
0032 0
. .
. .
. .
0064 32
14 SCH 0000 0
COARSE 0001 90
0002 180
0003 270
15 SCH FINE 0000 –32
. .
. .
. .
0032 0
. .
. .
. .
0064 32
16 AV PHASE 0000 –100
. .
. .
. .
0100 0
. .
. .
. .
0200 100
The underline on the setting item denotes the initial setting.
This selects the signal to output from the VIDEO OUT 2
connector.
0: The CTL signal is output.
1: The TIME CODE signal is output.
2: The VIDEO OUT signal is output.
3: The SYNC signal is output.
4: The PB L1R 3ch RF signal is output.
5: The PB L1R 3ch ENV signal is output.
<Notes>
1. The settings can be changed at any time regardless of the
setup menu item No. 30 (MENU LOCK) setting.
2. During normal playback, the output signals have levels
which are virtually identical to the values given below under
a 75
Ω
termination.
CTL: 0.1 to 0.3 Vp-p TC: 0.6 Vp-p
VIDEO: 1.0 Vp-p SYNC: 0.25 Vp-p
This selects whether the video output signal is to be adjusted
on the VTR or with the external encoder remote control.
0: Video output signals are adjusted with the external encoder
remote control.
1: Video output signals are adjusted on the VTR.
System phase adjustment: Total variable range: ± 180 ° or more
–: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
System phase adjustment: 74 ns steps
–: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
Video phase adjustment: 148 ns steps
–: Advanced
+: Delayed
SCH phase adjustment: 90
°
units
–: Advanced
+: Delayed
(The S and C phases change but the H phase does not
change.)
SCH phase adjustment: Total variable range: ± 45 ° or more
–: Advanced
+: Delayed
(The S and C phases change but the H phase does not change.)
This adjusts the audio output phase with respect to the video
output: 20.8
µ s steps
–: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the video
output.