Panasonic DVCPRO50 AJ-D960EG - Manual (Page 70)

Setup menus
70 (E)
USER menu
<EDIT>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
301 IN/OUT 0000 MANU
DEL 0001 AUTO
302 NEGA 0000 OFF
FLASH 0001 ON
303 STD/ 0000 AUTO
NON-STD 0001 STD
0002 N-STD
304 SERVO 0000 AUTO
REF 0001 EXT
0002 INPUT
305 EDIT 0000 N-DEF
RPLCE1 0001 CH1
0002 CH2
0003 CH1+2
306 EDIT 0000 N-DEF
RPLCE2 0001 CH1
0002 CH2
0003 CH1+2
307 EDIT 0000 N-DEF
RPLCE3 0001 CH1
0002 CH2
0003 CH1+CH2
The underline on the setting item denotes the initial setting.
This selects the operation to be performed when an edit point
has been set incorrectly (when the OUT point is before the IN
point).
0: Editing is not executed unless the illegal edit point is
cleared or set again properly.
1: The edit points already input are automatically cleared.
This selects whether to show a negative display when the IN
point is greater than the OUT point.
0: No negative display.
1: Negative display.
This selects STD or NON-STD in accordance with the compo-
site input signal.
0: Standard/non-standard signals are automatically identified
and processed.
1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)
<Note>
Use the non-standard (N-STD) setting when video or audio
trouble occurs with signals from laser discs or a satellite.
This selects the video signal processing.
0: Servo is synchronized with the input signal during recording
and editing, or with the REF signal during playback.
1: Servo is synchronized at all times with the REF signal.
2: The servo is synchronized with the input signal at all times.
This sets the channel assignments for the controller’s
analogue audio preset when editing the digital audio of the
VTR using a controller which does not have a digital audio edit
preset control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analogue audio signals designated by the controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.
The same type of setting as setup menu No. 305. This selects
the channel concerned when the CH2 edit preset is set in
compliance with the ON or OFF presetting for the analogue
audio signals designated by the controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.
The same type of setting as setup menu No. 305. This selects
the channel concerned when the CH3 edit preset is set in
compliance with the ON or OFF presetting for the analogue
audio signals designated by the controller.
0: Not set.
1: Compliance with analogue CH1 edit preset.
2: Compliance with analogue CH2 edit preset.
3: Compliance with either analogue CH1 or CH2 edit preset.