Panasonic DVCPRO50 AJ-D960EG - Manual (Page 50)

50 (E)
Multi cue
• The search pointer position is changed directly by pressing one of the buttons from CUE 1
to CUE 8 (ASMBL-TC) on the same page.
• When the page has been changed by simultaneously pressing the ADJ button and TRIM
+/– button, the following steps are performed depending on the setup menu No. 131 (PAGE
MODE) setting:
When “MANU” is set: The search and entry pointers move to CUE
1 on the changed
page.
When “AUTO” is set: Only the search pointer moves to CUE 1 on the changed page;
the entry pointer does not move.
Entry point operations
The entry pointer operations can be performed while the following is displayed on the front
panel. The point which is entered flashes when the SET button is pressed.
S R C 0 1 ¤ E N T 2 3 R 9 0
CH2 CH3 CH4 CUE TC ASMBL VIDEO CH1
4 5 6 7 8 1 2 3
Off (point not entered)
Example of panel
display
Example of LED
display
Flashes Lights
(point already
entered)
• The entry pointer position is changed directly by pressing one of the buttons from CUE 1
to CUE 8 (ASMBL-TC) on the same page.
If “AUTO” has been selected as the setup menu No. 131 (PAGE MODE) setting when the
page on which the cue points are being entered by the SET button has been filled, the entry
pointer will automatically move to CUE*1 on the next page. The search pointer does not
move.
• When the page has been changed by simultaneously pressing the ADJ button and TRIM
+/– button, the following steps are performed depending on the setup menu No. 131 (PAGE
MODE) setting:
When “MANU” is set: The search and entry pointers both move to CUE
1 on the
changed page.
When “AUTO” is set: Only the entry pointer moves to CUE 1 on the changed page; the
search pointer does not move.
Search point and entry display operations
One of two kinds of displays will appear when the CUE button has been pressed or when an
entry point has been entered by pressing the SET button in the entry point display mode.
C U E 0 1 0 0 : 1 1 : 2 2 : 0 0
C U E 0 1 – – : – – : – – : – –
When the point has already been entered
When the point is not entered