Panasonic DVCPRO50 AJ-D960EG - Manual (Page 75)

ENGLISH
75 (E)
Setup menus
USER menu
<TIME CODE>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
500 VITC 0000 BLANK
BLANK 0001 THRU
501 VITC 625 mode
POS-1 0000 7L
. .
. .
. .
0004 11L
. .
. .
. .
0015 22L
525 mode
0000 10L
. .
. .
. .
0006 16L
. .
. .
. .
0010 20L
502 VITC 625 mode
POS-2 0000 7L
. .
. .
. .
0006 13L
. .
. .
. .
0015 22L
525 mode
0000 10L
. .
. .
. .
0008 18L
. .
. .
. .
0010 20L
503 TCG 0000 TC&UB
REGEN 0001 TC
0002 UB
504 REGEN 0000 AS&IN
MODE 0001 ASSEM
0002 INSRT
0003 SW
505 EXT TC 0000 LTC
SEL 0001 VITC
506 BINARY 0000 000
GP 0001 001
0002 010
0003 011
0004 100
0005 101
0006 110
0007 111
The underline on the setting item denotes the initial setting.
For selecting whether to output the VITC signal at the posi-
tions selected by setup menu items No. 501 (VITC POS-1)
and No. 502 (VITC POS-2).
0: VITC signals are not output.
1: VITC signals are output.
This sets the position where the VITC signal is to be inserted.
<Note>
The same line as the one used for the setup menu item
No. 502 (VITC POS-2) setting cannot be set.
This sets the position where the VITC signal is to be inserted.
<Note>
The same line as the one used for the setup menu item
No. 501 (VITC POS-1) setting cannot be set.
This selects the signal to be regenerated when the time code
generator (TCG) in the REGEN mode.
0: Both the time code and user bit are regenerated.
1: Only the time code is regenerated.
2: Only the user bit is regenerated.
This selects whether the time code is to be regenerated during
automatic editing using the unit’s control panel.
0: Time code is regenerated with assemble or insert editing.
1: Time code is regenerated with assemble editing.
2: Time code is regenerated with insert editing.
3: Setting complies with REGEN/PRESET switch setting.
This selects the time code to be used when an external time
code is to be used.
0: The LTC of the TIME CODE IN connector is used.
1: The video signal VITC is used.
This sets the usage status of the user bit of the time code
generated by the TCG.
0: NOT SPECIFIED (character set not specified)
1: ISO CHARACTER (8 bits character set based on ISO646,
ISO2022)
2: UNASSIGNED 1 (undefined)
3: UNASSIGNED 2 (undefined)
4: UNASSIGNED 3 (undefined)
5: PAGE/LINE
6: UNASSIGNED 4 (undefined)
7: UNASSIGNED 5 (undefined)