Panasonic DVCPRO50 AJ-D960EG - Manual (Page 62)

Setup menus
62 (E)
USER menu
<BASIC> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
008 DISPLAY 0000 TIME
SEL 0001 T&STA
0002 T&S&M
0003 T&RT
0004 T&YMD
0005 T&MDY
0006 T&DMY
009 CHARA 0000 0
. .
. .
H-POS . .
0004 4
. .
. .
. .
0015 15
010 CHARA 625 mode
V-POS 0000 0
. .
. .
. .
0023 23
. .
. .
. .
0028 28
525 mode
0000 0
. .
. .
. .
0018 18
. .
. .
. .
0022 22
011 CHARA 0000 WHITE
TYPE 0001 W/OUT
012 SYS 0000 50M
FORMAT 0001 25M
013 PB FORMAT 0000 MANUAL
0001 AUTO
The underline on the setting item denotes the initial setting.
This selects what information is to be provided by the time code
and other super displays output to the VIDEO OUT 3/SERIAL
OUT 3 connector.
0: Time only.
1: Time and status.
2: Time, status and mode.
3: Time and REC TIME
4: Time and REC DATE (year/month/day)
5: Time and REC DATE (month/day/year)
6: Time and REC DATE (day/month/year)
<Notes>
1. Displayed as the mode is DVCPRO_50 for the DVCPRO50
(50 Mbps), DVCPRO for the DVCPRO (25 Mbps), DV for
the DV or DVCAM for the DVCAM.
2. An error message appears if a warning or error has occurred
when 2 (T&S&M) has been selected as this setting.
3. REC TIME and REC DATE are displayed during DV/DVCAM,
playback only. With the DVCPRO50 (50 Mbps) or DVCPRO
(25 Mbps) format, the operating mode is displayed.
This sets the position of the characters on the horizontal plane
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3 connector.
<Note>
When setting this item, the DISPLAY SEL status is output to
VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has been
set. However, when the menu is exited, operation complies
with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL OUT 3
according to the status set in the menu.
This sets the position of the characters on the vertical plane
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3 connector.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has
been set. However, when the menu is exited, operation
complies with the SUPER OFF/ON setting.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This selects the display type for the super display output to the
VIDEO OUT 3/SERIAL OUT 3 connector as well as for dis-
plays such as the setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
This sets the VTR’s recording and playback format.
0: DVCPRO50 (50 Mbps) is selected.
1: DVCPRO (25 Mbps) is selected.
Sets the format in which the tape is to be played back.
0: Compliance with the setup menu No. 012 (SYS FORMAT)
setting.
1: The format complies with the format recorded on the tape
when the DVCPRO mode has been selected as the setup
menu item No. 014 (FORMAT SEL) setting.
<Notes>
• When an editing mode has been selected, the “MANUAL”
setting is forcibly established for internal operations.
• There is no automatic setting in the 525/625 mode.