Specifications, 119 (e) – Panasonic DVCPRO50 AJ-D960EG User Manual
Page 119
ENGLISH
119 (E)
Video Output Connector
Analogue component output:
BNC
×
3 (Y, P
B
, P
R
)
Y;
1.0 Vp-p, 75
Ω
P
B
/P
R
; 0.7 Vp-p, 75
Ω
(100% colour bar, 0% black level)
Analogue composite output:
BNC
×
3, video 1, video 2 (video/WFM selectable), video 3 (superimpose on/off)
Serial digital component output:
BNC
×
3, complies with SMPTE 259M-C/EBU Tech.3267-E standard, SDI 1, SDI 2, SDI 3,
(superimpose on/off)
SDTI output (option):
BNC
×
1, complies with SMPTE 305M/321M standard (also serves as SDI1 output
connector)
Video Signal Adjustment
Composite video input signal:
±
3 dB
Video output gain:
±
3 dB
Video output chroma gain:
±
3 dB
Video output chroma phase:
±
30
°
Video output black level:
±
100 mV
Video output sync phase:
±
15
µ
sec
Video output SC phase:
±
180
°
AUDIO
Digital Audio
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz
±
1.0 dB (at the reference level)
Dynamic range:
Better than 90 dB (1 kHz, emphasis OFF, “A” weighted)
Distortion:
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk:
Less than –80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limit
Headroom:
625i; 18 dB
525i; 20 dB
Emphasis:
T1 = 50
µ
sec, T2 = 15
µ
sec (on/off selectable)
Cue Track
Frequency response:
300 Hz to 6 kHz
±
3.0 dB
Audio Input Connector
Analogue input
(CH1/CH2/CH3/CH4):
XLR
×
4, 600
Ω
/high impedance selectable (factory setting: 600
Ω
),
+4/0/–20 dBm selectable*
Digital input (CH1/CH2, CH3/CH4): XLR
×
2, AES/EBU format
Serial digital input:
Complies with SMPTE 259M-C, 272M/EBU Tech.3267-E (BNC
×
1, 75
Ω
)
Cue track input:
XLR
×
1, 600
Ω
/high impedance selectable (factory setting: 600
Ω
),
+4/0/–20/–60 dBm selectable*
Audio Output Connector
Analogue output
(CH1/CH2/CH3/CH4):
XLR
×
4, low impedance, +4/0/–20 dBm selectable (with 600
Ω
load)*
Digital output
(CH1/CH2, CH3/CH4):
XLR
×
2, AES/EBU format
Serial digital output:
Complies with SMPTE 259M-C, 272M-A/EBU Tech.3267-E (BNC
×
1, 75
Ω
)
Cue track output:
XLR
×
1, low impedance, +4/0/–20 dBm selectable (with 600
Ω
load)*
Monitor output:
XLR
×
2, low impedance, +4/0/–20 dBm selectable (with 600
Ω
load)*
Headphones:
Variable level, 6.5 mm, 8
Ω
Other Input/Output Connectors
Time code input:
XLR
×
1, 0.5 to 8 Vp-p, 10 k
Ω
Time code output:
XLR
×
1, low impedance, 2.0
±
0.5 Vp-p (with 600
Ω
load)
RS-422A input:
D-sub 9-pin, RS-422A interface
RS-422A output:
D-sub 9-pin, RS-422A interface
RS-232C:
D-sub 25-pin, RS-232C interface
Parallel input/output:
D-sub 25-pin
Encoder remote:
D-sub 15-pin
Weight and dimensions when shown are approxlmately.
Speclilcailons are subject to change without notice.
* EG model is fixed to –3 dBu.
Specifications