Panasonic DVCPRO50 AJ-D960EG - Manual (Page 77)

ENGLISH
77 (E)
Setup menus
USER menu
<VIDEO>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
600 INT SG 0000 OFF
0001 BB
0002 CB
601 OUT 0000 N-VF
VSYNC 0001 VF
602 V-MUTE 0000 N-MUTE
SEL 0001 LOW RF
603 CC (F1) 0000 BLANK
BLANK 0001 THRU
604 CC (F2) 0000 BLANK
BLANK 0001 THRU
605 FREEZE 0000 FIELD
SEL 0001 FRAME
606 OUT C 0000 B/W
KILL 0001 COLOR
609 EDH 0000 OFF
0001 ON
610 Pb/Pr 0000 M II
IN LV 0001 B-CAM
611 INPUT 0000 B/W
C KILL 0001 AUTO
614 Pb/Pr OUT 0000 M II
LV 0001 B-CAM
The underline on the setting item denotes the initial setting.
This selects whether to generate the internal signal.
0: Signal is not generated.
1: The black burst is generated.
2: 100% colour bars are generated.
This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
Selects whether to mute the video output signals when a
blank on the tape has been detected during playback.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed caption signal in the
first field.
0: Forced blanking performed.
1: Blanking not performed.
<Note>
This setup menu is not displayed in the 625 mode.
This selects ON or OFF for the closed caption signal in the
second field.
0: Forced blanking performed.
1: Blanking not performed.
<Note>
This setup menu is not displayed in the 625 mode.
This selects the freeze mode for still pictures.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma colour killer processing for the video
output signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
This selects the component input signal level.
0: M
II level.
1: ß cam level.
<Note>
This setup menu is not displayed in the 625 mode.
This selects colour killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects the analogue component output level.
0: M
II level
1: ß-CAM level
<Note>
This setup menu is not displayed in the 625 mode.
<Note>
When no optional board
(AJ-YA956 or AJ-YA957)
has been installed, setup
menus No. 610 and 611
are not displayed.