Panasonic DVCPRO50 AJ-D960EG - Manual (Page 67)

ENGLISH
67 (E)
Setup menus
USER menu
<OPERATION> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
116 EJECT 0000 MODE1
LAMP 0001 MODE2
130 MULTI CUE 0000 OFF
0001 ON
131 PAGE MODE 0000 MANU
0001 AUTO
132 ROTA MODE 0000 OFF
0001 ON
The underline on the setting item denotes the initial setting.
Selects whether the EJECT lamp is to remain lit or be turned
off in the cassette out status.
0: The EJECT lamp remains lit.
1: The EJECT lamp goes off.
Selects ON or OFF for the multi-cue function.
0: Multi-cue function OFF
1: Multi-cue function ON
<Notes>
• Editing cannot be performed when ON has been selected as
the multi-cue function setting.
• When the multi-cue function is set to ON in the editing mode
selection status, the editing channel selection buttons are
automatically released.
• When the multi-cue function has been set to ON, the deck-
to-deck facility cannot be used.
• When the multi-cue function has been set to ON, the mode
cannot be indicated on the front panel counter display.
Selects the cue point registration operation when the multi-
cue function has been set to ON.
0: Registration takes place on the selected page, and 8 cue
points can be registered.
1: When the page on which cue points are being registered
has been filled, registration automatically continues on the
next page. A total of 80 cue points can be registered on up
to 10 pages.
Selects the registration operation which is to be performed if
all the cue points have already been registered when the
multi-cue function has been set to ON.
0: The registration operation is not performed.
1: The registration operation is continued. If “MANU” has
been selected as the setup menu No. 131 (PAGE MODE)
setting, the cue point is registered in CUE
1 on the same
page; if “AUTO” has been selected, it is registered in
CUE01.