Reviewing the reo device summary page – Overland Storage REO 9000 User Manual
Page 101
Understanding the Summary Pages
W
101
Setup Guide
Reviewing the REO Device Summary Page
The REO Device Summary page provides an immediate view of your
REO Appliance and its status. The following shows two examples of what
you might see on this page (what you see depends on how you configure
your REO Appliance).
The following explains each of the columns:
REO Device ID. This entry is automatically designated by the REO
Appliance. Depending on the configuration, you might have up to 64
IDs in this list.
iSCSI Target Name. Displays either the default name assigned by
the REO Appliance or the new name assigned by you.
FC LUN. If you purchased the FC-enabled appliance, this column
displays the LUN for each device.
This image shows the JBOD
configuration on an FC-
enabled appliance. Three of
the REO Devices have been
configured to function as
virtual LTO-2 tape devices.
This image shows the RAID 5
configuration, with logical
volumes, on an FC-enabled
appliance. The connections
have all been changed to
operate through FC. Five
logical volumes have been
created at this point.