Overland Storage REO 9000 - Manual (Page 103)

Understanding the Summary Pages W 103
Setup Guide
Reviewing the External Device Summary
The External Device Summary page provides an immediate view of the
External Devices attached to the REO Appliance.
The following explains each of the columns:
„ REO Device ID. This entry is automatically designated by the REO
Appliance. Depending on the configuration, you might have up to 30
IDs in this list.
„ iSCSI Target Name. Displays either the default name assigned by
the appliance or the new name assigned by you.
„ Device Type. Indicates whether the device is exported as a Changer
(medium changer), Tape (tape drive), or CD/DVD (CD-ROM or DVD
drive).
„ SCSI Port:ID. Identifies the SCSI port through which the device is
attached and the SCSI ID of the device itself.
„ Inquiry Information. Displays information published by the device
itself (for example, the type of drive technology that the device uses).
Reviewing the External Initiator Summary Page
The External Initiator Summary page provides an immediate view of the
initiators (systems) that you have defined for the External Devices
(targets). For each initiator, this page shows which devices (targets) it is
associated with and any information known about those devices.
Tip: To access the External Initiator Configuration page for a specific
initiator, click the applicable Initiator Name. To access the External
Device Configuration page for a specific device, click the applicable
REO Device ID.