Overland Storage REO 9000 User Manual
Page 94
94
X
Associating Targets (Devices) and Initiators
Overland Storage REO 9000 with ProtectionPAC Software
The iSCSI initiator name entered here must match the name of the
iSCSI initiator on the associated backup server.
Tip:
To copy the initiator name if you are using the Microsoft initiator
driver and then paste it here, use the initiator configuration tool. Click
the Initial Settings tab, highlight the initiator node name, click Edit,
and copy the initiator node name.
c
(Optional) In the Initiator IP Address box, if you want to use an
additional level of authentication, use dotted decimal notation to enter
the IP address of the backup server.
If present, the IP address of the initiator is compared with the IP
address you enter here.
5
If you are working with Fibre Channel, do the following:
a
In the Connection Type section, select FC.
b
In the WWNN and WWPN boxes, enter the official node and port
names of the authorized initiator for the target.
Tip:
You can retrieve the initiator WWNN and WWPN by using the
specific FC host adapter management software utility or by querying
the name server on the FC switch.
Enter the unique
name of the
initiator, select the
ID, and click Submit.
Select FC, enter the
node and port
names for the
initiator, select the
ID, and click Submit.