Overland Storage REO 9000 - Manual (Page 153)

Installing an Update W 153
Setup Guide
10 In the REO Information section, note that the Product Version now
reflects the new version of the software.
If applicable, the Flash Version might also be different.
11 If you are using the FC-enabled version of the product, complete the steps
in the next section to determine whether an update for the firmware on
the FC controller is available.
Updating the Firmware on the FC Controller
1 Review the information listed in the REO Information section.
If the firmware on your FC controller needs to be updated, you will see
information similar to the following:
2 If the firmware needs to be updated, detach the FC cables from the REO
Appliance, and then click Update REO.
3 In the Fibre Channel Firmware Updates section of the REO Update
page, click Update FC Firmware.