Overland Storage REO 9000 User Manual
Page 125
Unable to Connect to the Disks via Windows Explorer
W
125
Setup Guide
Unable to Connect to the Disks via Windows Explorer
If you are unable to access the disks on the REO Appliance, it might be
because the system or a disk on the appliance is malfunctioning, because
the disks were reformatted using a file system other than NTFS, or
because the disks are not formatted.
1
Make sure that the REO Appliance is turned on and that all cables are
correctly connected.
2
Make sure that you can view other disks from the same initiator.
If not, there might be a problem with a cable or the Ethernet connection.
3
Make sure that you can view the targets (REO Devices) from the
initiator.
a
Log on to the software console.
b
In the left pane, under Volume Menu, click Physical Volume
Management.
c
Verify that the Status of each volume and disk is OK, which indicates
that the target is functioning correctly.
Click Physical Volume Management.