Installing the disk carriers and disk drives – Overland Storage REO 9000 User Manual

Page 25

Advertising
background image

Installing the Disk Carriers and Disk Drives

W

25

Setup Guide

9

Slide the REO Appliance into the rack, and attach the captive screw on
each panel extension (left and right sides) to the rack and nut plate.

Installing the Disk Carriers and Disk Drives

The disk carriers, which contain the disk drives, are packaged
separately, which allows you to insert them into the chassis after you
have installed the chassis in the rack.

1

Remove the package of desiccant from each slot in the chassis.

2

Insert the first disk carrier in to the applicable slot in the chassis.

3

Close the disk carrier by doing the following:

a

Make sure that the lever is in its fully extended, open position.

b

Press the right side of the carrier into the slot.

c

Press the lever in. Pressing the lever in draws the carrier fully into the
slot and locks it in place.

4

Repeat these steps for each disk carrier.

5

Attach the appliance face-plate.

REO90006

0

1

2

3

4

5

6

7

8

9

10

11

15

14

13

12

16

17

18

19

23

22

21

20

Advertising