Overland Storage REO 9000 User Manual
Page 29
Attaching the Power Cords
W
29
Setup Guide
Each power supply contains:
A socket for insertion of an AC line cord.
A two-color LED for indicating the status of the power supply. When
AC is applied to the supply and standby voltages are available, the
LED becomes red. When all outputs are available, the LED becomes
green. If the power supply fails, the LED becomes red.
A latch for releasing the power supply from the REO Appliance.
A handle for pulling the power supply out of the REO Appliance.
A pair of fans for preventing the power supply from overheating.
A feature that verifies the following (if not detected, an alarm signal
sounds):
All output voltages V1 to V5 are within regulation.
The fans are operating normally.
The internal temperature of the power supply is normal.
3
Complete the steps outlined in the next chapter,
Socket
Extraction handle
Fans
Release latch
Thumbscrew