Overland Storage REO 9000 - Manual (Page 99)

Working with the REO 9000 W 99
CHAPTER
10 Working with the REO 9000
This chapter provides a few tips on working with the REO Appliance
including:
„ Logging on to the Web interface.
„ Reviewing the information displayed in the REO Device Summary.
„ Switching from one configuration to another.
„ Understanding how disk drives are numbered.
„ Powering down the REO Appliance.
Logging On from Any System with Network Access
After you have completed configuration of the REO Appliance, you can
access the REO Appliance console from any system that has network
access to the IP address of the Management Port.
1 Choose one of the following:
„ If you are using DHCP, using the management system, access the
mapped drive \\REO\programs, and then double-click the
Overland.html file.
„ If you are not using DHCP, in your Web browser, type the IP address
assigned to the Management Port for the REO Appliance.
Tip: You can also use the IP addresses assigned to the Data Ports, which
you can do even if you are using DHCP.
2 When the prompt appears, type your name and password (the defaults
are
Administrator and system ) in case-sensitive format.