Overland Storage REO 9000 - Manual (Page 92)

92 X Associating Targets (Devices) and Initiators
Overland Storage REO 9000 with ProtectionPAC Software
Configuring REO Devices (Targets) and Initiators
1 In the left pane, under REO Device Menu, click REO Device
Configuration.
The iSCSI Target Name fields are assigned default values of
idevice.name0 through idevice.name23 (JBOD); idevice.name0,
idevice.name1, idevice.name12, and idevice.name13 (RAID 0 or 5,
without logical volumes); or idevice.name0 up through
idevice.name63 (RAID 0 or 5, with up to 64 logical volumes).
Important: The target names must be unique within a network. If you
are using multiple appliances, you must change the default target
names. For more information, see
Expanding Storage Capacity
(Scalability) on page 107.
Click REO Device Configuration.