Overland Storage REO 9000 - Manual (Page 79)

Creating Tape Devices W 79
Setup Guide
6 To change the default target name of a device, in the iSCSI Target
Name box, type the new name (for example, LTO7).
Important: The target names must be unique within a network. If you
are using multiple appliances, you must change the default target
names. For more information, see
Expanding Storage Capacity
(Scalability) on page 107.
7 To save your changes, click Submit.
8 When the warning message appears that indicates all data currently
residing on the device will be deleted, click OK to continue.
Type a new name (if
desired), and then
click Submit.