Overland Storage REO 9000 - Manual (Page 54)

54 X Configuring the Management System
Overland Storage REO 9000 with ProtectionPAC Software
4 In the left pane, under System Menu, click Network Configuration.
5 If you are not using DHCP, in the Default Gateway section of the right
pane, make sure that the correct IP Address appears.
If DHCP is disabled, the IP address and other information is completed
using information from the configuration file that you previously
modified (for more information, see
Editing the Configuration File (for a
non-DHCP or UNIX Management System) on page 33).
Click Network Configuration.
Verify that this is the
correct information
for your network.