Overland Storage REO 9000 - Manual (Page 75)

Creating Tape Devices W 75
Setup Guide
2 From the REO Device ID list, select the first device whose configuration
you want to change.
3 In the Device Type section, select Tape.
4 If you want to maximize backup storage capacity, select the Enable
Tape Compression check box (for optimal backup performance, leave
the check box cleared).
5 To change the default target name of a device, in the iSCSI Target
Name box, type the new name (for example, LTO7).
Important: The target names must be unique within a network. If you
are using multiple appliances, you must change the default target
names. For more information, see
Expanding Storage Capacity
(Scalability) on page 107.
6 To save your changes, click Submit (or click Reset to cancel).
Select a device.
Type a new name (if
desired), and then
click Submit.