Overland Storage REO 9000 - Manual (Page 52)

52 X Configuring the Management System
Overland Storage REO 9000 with ProtectionPAC Software
Verifying that the Gateway Address and
Management Port are Correctly Configured
The Default Gateway is the IP address that provides entrance into the
network to which the REO Appliance is assigned. The Management Port
connects the REO Appliance to the management system, which you use
for network management on the LAN.
Important: Remember that the Management Port and both Data Ports
must be on separate subnets.
1 Using the management system, access the mapped drive
\\REO\programs.
2 To open the REO Appliance console in your Web browser, double-click the
Overland.html file.
Tip: After you have initially configured your REO Appliance, if you are
not using DHCP, you can also access the interface by typing the IP
address assigned to the Management Port for the REO Appliance.
To launch the console,
double-click Overland.