Overland Storage REO 9000 User Manual
Page 93
Configuring Targets (REO Devices and External Devices) and Initiators
W
93
Setup Guide
2
To change an iSCSI Target Name, type the new name in the text box,
and then click Submit.
3
From the REO Device ID list, select the device for which you want to
add initiators, and then click Add New Initiators.
4
If you are working with iSCSI, do the following:
a
In the Connection Type section, make sure that iSCSI is selected
(this is the default).
b
In the iSCSI Initiator Name box, enter a unique name (up to 223
alphabetical or numerical characters) of an authorized initiator for the
target.
The fully qualified iSCSI name is assigned by the manufacturer of
either the software initiator or the storage adapter installed on your
backup server.
To change a target’s name, type the new name in this box, and then click Submit.
Select the device,
and then click Add
New Initiators.