Output Solutions 650 - Manual (Page 125)

Appendix B IBM ProPrinter X24 and IBM ProPrinter II Commands
ESC S n
Superscript/Subscript Hexadecimal code: 1B 53 n
Sets the printing of small characters in the current pitch. It is obtained by a single printing
pass.
Superscript is printed using the top five needles of the print head and subscript with the
bottom five needles of the normal character matrix. Both settings are canceled by ESC T.
n = 0 (0 or 48)D: superscript
n = 1 (1 or 49)D: subscript
ESC T
Cancel Superscript/Subscript Hexadecimal code: 1B 54
Cancels the two settings obtained by ESC S n.
ESC U n
Uni/Bidirectional Printing Hexadecimal code: 1B 55 n
Sets continued uni or bidirectional printing. Parameter n may be set to:
n = 0 (0 o 48)D : bidirectional
n = 1 (1 o 49)D : unidirectional
ESC W n
Double Width (continued) Hexadecimal code: 1B 57 n
Sets/cancels double width.
Parameter n sets/cancels double width (the width of the characters is doubled with
respect to the preselected print pitch and, as a result, the capacity of the print lines is
divided by two).
n = 1 (1 or 49)D: sets
n = 0 (0 or 48)D: cancels
B-15