Output Solutions 650 - Manual (Page 145)

C-1
Appendix C EPSON LQ-Emulation Commands
Characters used in control functions appear in monospaced type. The table below
explains some of the conventions used.
A pair of numbers separated by a slash ( / ) character indicates Column/Row notation.
This notation refers to the location of a character in a standard code table, such as
ASCII. (example: 1/B = 1B is the hex-code for Escape)
Spaces appear between characters in sequence for clarity; they are not part of the
format.
At the begin of this chapter you will find a listing of the LQ Emulation commands
classified by Hex Code and at the end a Hex - Decimal conversion table.
The following conventions are used in the command listings:
Conventions:
ESC Escape (1/B), introduces an escape sequence.
Pn Numeric parameter, or number of units that specify a distance or
quantity pertaining to the escape sequence, control function or
control string. Accepted values are 0...9999, may be preceded by +
or -.
If the parameter is in normal notation like "200" the programming in
hex-code is according to a ASCII table. ("200" = 32,30,30 in hex).
n1..n2..n3....nn A series of parameters pertaining to the escape sequence, control
function or control string.
* Indicates
multiplied by