Output Solutions 650 - Manual (Page 162)

C-18
ESC S n Set subscript/superscript character
Set subscript/superscript in character
Hex:
(1B 53 n)H
Decimal: (27 83 n)D
Octal: (33 123 n)O
n = 0:
Set superscript character
n = 1: Set subscript character
ESC SO
Set double width (one line)
This command sets the printable character to be printed horizontally enlarged (double width), it
is valid only for one line.
Hex: (1B
0E)H
Decimal: (27 14)D
Octal: (33 16)O
ESC SP n
Set CPI
Set character pitch of character.
In draft, the character width will be set as n/120 inch, or else it will be set as n/180 inch.
Hex:
(1B 20 n)H
Decimal: (27 32 n)D
Octal: (33 40 n)O
ESC T
Reset subscript / superscript character
Reset subscript / superscript character.
Hex: (1B
54)H
Decimal: (27 84)D
Octal: (33 124)O