Output Solutions 650 - Manual (Page 171)

C-27
C.2.9 Other Functions
• CAN : Clear print buffer
• DLE B : Soft initialization
• ESC BEL n : Change emulation
• ESC R n : Select code table
• ESC @
CAN
Clear buffer
Clear the print buffer
Hex: (18)H
Decimal: (24)D
Octal: (30)O
DLE B
Soft initialization
This command clears buffer and initializes printer, it sets all the parameters to the power-on
default conditions.
Hex: (10
42)H
Decimal: (16 66)D
Octal: (20 102)O
ESC BEL n
Change Emulation
This command causes to print data in the current buffer and change emulation to the
corresponding one according to the value of n.
Hex: (1B-07-n)H
Decimal: (27-07-n)D
Octal: (33-07-n)O
n = ‘F’:
Change into IBM emulation.
n = ‘G’: Change into OKI emulation.
Note.
All other values of n will be ignored.