Output Solutions 650 - Manual (Page 64)

Technical Data
6.2 Document Specification and Technical Instruction
Disposable Form:
• Single sheet or multi-copy paper
• Bill (card)
Caution:
If the print media does not accord to the above character, you have
to discriminate it carefully before you use it.
Printing Media Character:
• Input media handwork
• Margin align automatically
• Max thickness 2.2 mm
• Max width 245 mm
• Max length per line 10 CPI (238 mm)
• Standard of top of page of document (measured
from the character’s bottom):
• C-650 Plus emulation = 4.3 mm
• IBM PP II = 4.3 mm
• The min distance from the last basic printing line to the page bottom margin:
• 5 mm (0.2 inch)
• Min value of document rear (measured from the character bottom):
• C-650 Plus emulation = 3.1 mm
• IBM PP II = 10 mm
• Left and right margin value of document LH/RH:
• min 3.1 mm ± 0.3 mm
• Min distance between last basic line character above the cord and horizontal cord:
• 5 mm
• Min distance between last basic line character below the cord and horizontal cord:
• 8 mm
• Distance between character Axial wire and vertical cord
• 5.08 mm
6-3