Output Solutions 650 User Manual
Page 157
Advertising
C-13
ESC \ n1 n2
Set Relative Horizontal Printing Position
Set relative horizontal printing position
Hex:
(1B 5C n1 n2)H
Decimal:
(27 92 n1 n2)D
Octal:
(33 134 n1 n2)O
The defined unit will be different according to print quality and PNS item in menu:
Draft: move (n2 * 256 + n1)/120 inch from the current position
LQ: move (n2 * 256 + n1)/180 inch(ESC/P) or (n2 * 256 + n1) (horizontal unit/3600) inch
(ESC/P 2) from the current position.
Note:
If this command is received consecutively , the consecutive (n2 * 256 + n1) will
be accumulated and sets the low 15 bits as valid movement parameter.
Advertising