Output Solutions 650 - Manual (Page 23)

2. Printer Operation
2.1 Operator Panel
The Operator Panel
• controls the setup for communication with the host computer;
• controls various parameter settings;
• allows manual control of the paper handling;
• gives information about the printer's status.
1 Two lines Liquid Crystal Display (LCD) Display
The LCD Display (1) indicates the current status of the Printer. If any error occurs (e.g.
PLEASE CLOSE COVER) the corresponding error message will be displayed. The green
LED (2) lights only if the Printer is powered on and in the On-line Mode.
Light Emitting Diode (LED)
2 Online LED
3 Ready LED (flashing if receiving data)
4 Station 1 LED (user 1 active; only lighting up if a second serial Interface is
installed and a special software is working)
5 Station 2 LED (user 2 active; only lighting up if a second serial Interface is
installed and a special software is working)
2-1