Output Solutions 650 - Manual (Page 47)

Configuring the Printer
Key or action Two line display
[STATION 2]
Note: The adjustment is only active during power on.
[STATION 2] and [COMPRESS –] together
to leave the off-line mode
OFF-LINE MODE
ADJUSTMENT
SAVE PARAMETERS
#
ACCEPT ST2 = IGNORE
The new values of adjustment to be default settings can be saved now or ignore the new
values. After saving and power OFF and ON the new adjustment is still activated.
3.6.2 LEFT MARGIN
The [FEED/EJECT •] key reduce the current value (left margin is moving to the left side)
and the [COMPRESS –] key increases the current value (moving to the right side).
After entering adjustment, you have to do the following steps:
Key or action Two line display
Select Adjustment ADJUSTMENT
PHOTOSENSOR VALUE
[COMPRESS –]
until LCD shows
ADJUSTMENT
LEFT MARGIN
[STOP #] to select
Press [FEED/EJECT •] or [COMPRESS –] to find the new left margin.
The range is from zero up to 133.
LEFT MARGIN 17
• = LEFT – = RIGHT
LEFT MARGIN 20
• = LEFT – = RIGHT
Insert an A4 sheet to control the setting. The printer will insert the paper
automatically, print the current margin and eject the paper.
LEFT MARGIN (20)
• = LEFT – = RIGHT
[STOP #] to accept LEFT MARGIN
SAVE PARAMETERS
Display after saving ADJUSTMENT
LEFT MARGIN
3-19