Output Solutions 650 - Manual (Page 27)

Printer Operation
2.4 Load Print Medium
The Printer can deal with single sheet, cheque,multi copy carbon paper and carton. The
printer will start inserting the sheet automatically when the operator puts the print medium
into paper feeding path. Users needn’t bother aligning the print medium with the left or
right border of the printer. The printer itself aligns automatically.
Note:
As soon as the auto alignment process starts after you put in a medium, please
release the medium.
2.5 Menu Mode
All selectable features are accessible via the operator panel and combined in the Printer
MENU.
This feature provides:
• easy configuration (language, etc.)
• quick parameter changes
• activation of test functions
There are six entry points in the highest level:
• MENU SETUP Set up the Menu parameters for various modules (common
configuration and different emulation) and the important save
function is included.
• MENU PRINTING Printout of the Menu which is in use.
• PRINTING TEST A printout of the user's guide, the ASCII character sets and
character attributes is possible.
• ADJUSTMENT Include printing the current settings of the photoelectric sensor, re-
setting up the photoelectric sensor and printing the new settings,
setting up the left margin, setting up the top margin, alignment
adjusting for bi-direction print, and run-in printing etc.
• DEBUG TEST A Hexdump-function is available and a soft test for reading a
magnetic stripe.
• INFO INQUIRY Inquire current parameters settings of both software and hardware,
including the version (version number, nonstandard issue tag,
special simulation etc.), a hardware configuration (characters
generators, optional interface connections, a scanner, the sprocket),
PCB ID, firmware check sum etc.
2-5