Output Solutions 650 - Manual (Page 56)

Configuring the Printer
3.8 INFO INQUIRING
You get information of the current setting parameters of software or hardware. This
information is important for the system engineer and service staff.
You can select the following parameters:
• FW VERSION
• HW CONFIGURATION
• PRINTER ID
3.8.1 FW Version
The parameter firmware version shows:
• version number
• special version tag e.g.: FW VERSION
VER2.09 T7FPGA:2.4
Note:
In this sample indicates VER2.09 the version number (firmware release), and T7 the
special version tag.
3.8.2 HW Configuration
The parameter hardware configuration gives information over:
• characters generators
• optional interface e.g.:
• scanner (only with MagneticTest)
HW CONFIGURATION
GB18030 CX
3.8.3 Printer ID
The display shows the identification of the printer:
e.g.: PRINTER ID
00000AEE6B3501
3-28