Texas Instruments PLUS TI-89 - Manual (Page 304)

Chapter 17: Programming 287
17PROGRM.DOC TI-89/TI-92 Plus: Programming (English) Susan Gullord Revised: 02/23/01 1:14 PM Printed: 02/23/01 2:18 PM Page 287 of 40
To call a separate program, use the same syntax used to run the
program from the Home screen.
:subtest1()
:Prgm
:For i,1,4,1
: subtest2(i,iù 1000)
:EndFor
:EndPrgm
To define an internal subroutine, use the Define command with
Prgm...EndPrgm . Because a subroutine must be defined before it can
be called, it is a good practice to define subroutines at the beginning
of the main program.
An internal subroutine is called and executed in the same way as a
separate program.
:subtest1()
:Prgm
:local subtest2
:Define subtest2(x,y)=Prgm
: Disp x,y
:EndPrgm
:¦ Beginning of main program
:For i,1,4,1
: subtest2(i,iù 1000)
:EndFor
:EndPrgm
At the end of a subroutine, execution returns to the calling program.
To exit a subroutine at any other time, use the
Return command.
A subroutine cannot access local variables declared in the calling
program. Likewise, the calling program cannot access local variables
declared in a subroutine.
Lbl commands are local to the programs in which they are located.
Therefore, a Goto command in the calling program cannot branch to
a label in a subroutine or vice versa.
Calling One Program from Another
One program can call another program as a subroutine. The
subroutine can be external (a separate program) or internal
(included in the main program). Subroutines are useful when a
program needs to repeat the same group of commands at
several different places.
Calling a Separate
Program
Calling an Internal
Subroutine
Tip: Use the Program
Editor’s
† Var toolbar
menu to enter the Define
and Prgm...EndPrgm
commands.
Notes about Using
Subroutines
:subtest2(x,y)
:Prgm
: Disp x,y
:EndPrgm
Defines the subroutine.
Declares the subroutine
as a local variable.
Calls the subroutine.