Texas Instruments PLUS TI-89 - Manual (Page 569)

552 Appendix B: Reference Information
8992APPB DOC TI-89/TI-92 Plus:8992appb doc (English) Susan Gullord Revised: 02/23/01 1:54 PM Printed: 02/23/01 2:24 PM Page 552 of 34
Determines how 2-element and 3-element vectors are displayed. You
can enter vectors in any of the coordinate systems.
1:RECTANGULAR Coordinates are in terms of x , y , and z . For
example, [3,5,2] represents x = 3 , y = 5 , and z = 2.
2:CYLINDRICAL Coordinates are in terms of r , q , and z . For
example, [3, ∠ 45,2] represents r = 3 , q = 45 , and
z = 2.
3:SPHERICAL Coordinates are in terms of r , q , and f . For
example, [3, ∠ 45, ∠ 90] represents r = 3 , q = 45 , and
f = 90 .
Determines how results are displayed on the Home screen.
1:OFF Results are displayed in a linear, one-
dimensional form.
For example, p ^2 , p /2, or ‡ ((x-3)/x)
2:ON Results are displayed in conventional
mathematical format.
For example, p 2 ,
p
2
, or
x ì 3
x
Note: For a complete description of these settings, refer to “Formats
of Displayed Results” in Chapter 2.
Lets you split the screen into two parts. For example, you can
display a graph and see the Y= Editor at the same time (Chapter 14).
1:FULL The screen is not split.
2:TOP-BOTTOM The applications are shown in two screens that
are above and below each other.
3:LEFT-RIGHT The applications are shown in two screens that
are to the left and right of each other.
To determine what and how information is displayed on a split
screen, use this mode in conjunction with other modes such as
Split 1 App , Split 2 App , Number of Graphs , and Split Screen Ratio . ( Split
Screen Ratio is available on the TI -92 Plus only.)
Vector Format
Pretty Print
Split Screen