Tally Genicom Intelliprint 8026DN - Manual (Page 100)

Mar 06
3-14 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Warning Messages and Error Messages
PHD Type Err
Install / Reset Wrong PHD (process) unit installed Re-install or replace the PHD unit
Toner [x] Type Err
Install / Reset Wrong Toner [x] cartridge installed Re-install or replace the toner
cartridge
CRUM ID: Fuser
Replace Fuser Wrong Fuser unit installed Replace with correct fuser
CRUM ID: PHD
Replace PHD Wrong PHD installed Replace with the correct PHD
CRUM ID Error: [x]
Replace Toner Wrong Toner cartridge [x] installed Replace with the correct toner
cartridge
CRUM Failure: [x]
Replace Toner CRUM unit faulty Replace toner cartridge [x]
[x] Tape Remaining
Check Toner Toner cartridge [x] tape not removed Remove tape from cartridge
CTD Sensor Dusty
Clean CTD Sensor Toner density sensor is dusty Clean the toner density sensor
Fuser ID Warning
Install / Reset Fuser CRUM faulty Re-install or replace fuser unit
PHD ID Warning
Install / Reset PHD CRUM faulty Re-install or replace the PHD unit
Toner [x] ID Warning
Replace / Reset Toner [x] CRUM faulty Re-install or replace the Toner
cartridge
Dev [x] Life Over
Install / Reset Developer [x] needs to be replaced
Out of Memory
Press Start Insufficient memory to complete job Add more memory
Clock Not Set
Press Start Real time Clock not set Set the time and date
Error: You Must
Turn DHCP Off Trying to set IP address with DHCP
turned on Turn off DHCP before manually
setting IP address
IPADDR Collision
Press Start IP packet collision Press start to continue
NVRAM Error xx
Press Start Memory problem Press start to continue
Ready
Maintenance Reqd. Printer has printed 300,000 pages Call for service
ROS Failure
Call Service ROS faulty Call for service
Error Message Possible Cause Action