Output print data stored – for both pcl and ps – Tally Genicom Intelliprint 8026DN User Manual
Page 177
Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
7-19
Job Library
Output print data stored – for both PCL and PS
This section describes the procedure to output print data stored inside the machine using the
Store Print feature.
NOTE: You can also delete stored print data without printing.
1. Press <MENU>.
Menu
Job Library
2. Press <SELECT> to enter the Job Library menu.
Job Library
Print & Delete
3. Press <NEXT> to move to the submenu "Print".
Job Library
4. Press <SELECT> to enter the submenu "Print".
User * DIR
5. Press <PREVIOUS> or <NEXT> until desired directory is shown:
Job1 Dir
6. Press <SELECT>.
Number1
7. Press <PREVIOUS> or <NEXT> until the display shows the desired job.
8. Press <SELECT>.
Number1
PIN: 0000
9. Press <PREVIOUS> or <NEXT> until the display the correct value for the first digit in the
PIN number. Then Press <SELECT>. The cursor will move to the next digit. Repeat the
process to enter the next three digits.
Job1
Copies 1
10. Press <NEXT> until the display shows the desired number of copies.
11. Press <SELECT>.
Processing/Printing
Playback