Tally Genicom Intelliprint 8026DN - Manual (Page 22)

Feb 06
8 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Safety Notes
Once a month, unplug the machine and check the power cord for the following:
• The power cord is plugged firmly into a receptacle.
• The plug is not excessively heated, rusted, or bent.
• The plug and receptacle are free of dust.
• The cord is not cracked or frayed.
If you notice any unusual conditions, contact our Customer Support Center or your dealers.
When the machine is not used over an extended period of time, switch it off and unplug it. If
an unused machine is left connected to a power source for a long period, degraded
insulation can cause electric shock, current leakage, or fire.
Switch off the machine before connecting the interface cable and optional product.
Connecting the cable or card with a live machine can cause electric shock.
• Reception interference
When installed at a certain location, the machine may cause interference with radio and
television reception. If you notice flickering or distorted images or noises on your audio-visual
units, your machine may be causing radio interference. Switch it off, and if the interference
disappears, the machine is the cause of radio interference. Perform the following procedure until
the interference is corrected.
• Move the machine and the TV and/or radio away from each other.
• Reposition or reorientate the machine and TV and/or radio.
• Unplug the machine, TV and/or radio, and replug them into outlets that operate on different
circuits.
• Reorientate the TV and/or radio antennas and cables until the interference stops. For an outdoor
antenna, ask your local electrician for support.
• Use coaxial cable antennas.