About this manual, Scope, Overview – Tally Genicom Intelliprint 8026DN User Manual

Page 6: Printer orientation, Conventions

Advertising
background image

Mar 06

vi

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
About this Manual

About this Manual

Scope

This User Guide contains all of the information necessary to operate and care for your printer
and accessories. It is intended to be used with the pictorial unpacking instructions and the
Installation Guide, both included in the printer packaging. If you have not already unpacked and
installed the printer, please refer to these documents. This guide does not contain instructions
for unpacking and installing the printer.

Overview

This manual contains Safety Notes, eight chapters (1 through 8) and one appendix:

Printer Orientation

Throughout this guide, the four sides of the printer are referred to as front, rear, right, and left.
The front of the printer is the side near the control panel, and the rear of the printer is opposite
the front. The left and right sides of the printer are defined as the sides to the left and right,
respectively, of a person who is facing the front of the printer.

Conventions

This following conventions are used throughout this manual to emphasize certain procedures or
information:

NOTE: A note is a tip or extra information that may be helpful in installing or using the

printer.

A caution message provides information that may help you avoid equipment damage, process
failure, or inconvenience. Read all caution messages carefully.

A warning message indicates the possibility of personal injury if a specific procedure is not per-
formed exactly as described in the guide. Pay close attention to these sections and read them
fully to prevent possible injury.

Advertising