Tally Genicom Intelliprint 8026DN - Manual (Page 31)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 1-3
Safety Precautions
Unsuitable locations
■
Locations with direct exposure to sunlight
■
Locations close to cooling/heating appliances
■
Locations with direct exposure to drafts
■
Locations susceptible to vibrations
■
Dusty and dirty locations
■
Locations close to open flame
■
Damp locations
■
Locations exposed to magnetic forces
■
Locations susceptible to sudden changes in temperature or humidity
When Using an Ultrasonic Water Vaporizer
Using tap or well water with ultrasonic water vaporizers disperses impurities into the air. These
impurities can accumulate inside the printer and cause print quality to deteriorate. If you install
the printer in the same room as an ultrasonic water vaporizer, use only filtered water in the
water vaporizer.
Safety Precautions
This printer is available in either of the following power specifications: 110V and 220V. The
specifications that apply to your printer depend on your machine configuration. To prevent fire
or shock hazards, connect the power plug only to a properly rated power outlet.
Handling the Printer
Follow the guidelines below when lifting or moving the printer:
■
The printer is very heavy, and should always be lifted by two people. The weight of the printer
without paper tray, toner cartridge, and paper is about 51 lbs (23 kg). Never attempt to lift the
printer alone.
■
To lift the printer, have two individuals facing each other from the front and the rear of the
printer grasp the recessed areas on each side of the printer. Do not lift the printer by grasping
any area other than these recessed areas.
■
When lifting the printer, maintain proper lifting posture to prevent injuries.