Tally Genicom Intelliprint 8026DN - Manual (Page 215)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 8-15
Using the Power-On Files Feature
Collating, Saved Jobs, and Job Accounting
The features discussed in this section are designed to work with the Hard Disk/Compact Flash
Option. However, if no Hard Disk/Compact Flash Option is installed, but a User Flash Option is
installed, these features will utilize the User Flash Option. If both the Hard Disk Option and a
User Flash Option are installed, these features will default to the Hard Disk/Compact Flash
Option.
There are two new features available using the Hard Disk or User Flash Option; Collating and
Saved Jobs. The drivers that support these new features are as follows:
■
PCL – All windows platforms
■
PostScript – Windows 2000 and Windows XP
Collating Feature
When this feature is enabled, multiple copies of the entire document (all pages e.g. 1-3, 1-3,
1-3) will be printed in sequential order rather than multiple copies of each individual page (111,
222, 333).
You access the collating feature through the drivers that support this feature. But, before these
features can be used, either Flash or Disk must be set as installed in driver Device Settings. To
access the Collating feature on your desktop, go to the Start menu, left click on Settings, left
click on Printers, and then click on your printer driver icon, right click and follow the menu to the
Properties menu.
Use the following procedure to enable collating using the PS driver:
1. Click on the Device Settings button. Scroll down and make sure a Hard Disk option or
User Flash is installed. Then click the OK button. A Hard Disk or User Flash must be
installed to use the Collating Feature..