Tally Genicom Intelliprint 8026DN - Manual (Page 51)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 1-23
Adjusting Colour Alignment
1. From the Ready status, press MENU, the control panel display will read:
Menu
Job Library
2. Press PREVIOUS or NEXT until the display reads:
Menu
Colour Menu
3. Press SELECT, the display will read:
Colour Menu
Rendering Intent
4. Press PREVIOUS or NEXT until the display reads:
Colour Menu
Alignment
5. Press SELECT, the display will read:
Alignment
Alignment Page
6. Press PREVIOUS or NEXT until the display reads:
Alignment
K-H Adjust
7. Press SELECT, the display will read:
K-H Adjust
0
8. Press PREVIOUS or NEXT until the correct adjustment value is shown on the display.
9. Press SELECT to store this value.
NOTE: The adjustment for K-H is -127 to 127, where each increment is 0.17 mm.
Negative increments move the image towards the left of the page.